The Process of Mold Damage Restoration

5/16/2017 (Permalink)

The Process of Mold Damage Restoration

Mold and its Causes

Mold and mildew are both fungi that can grow either indoor or outdoor as long as there is moisture. Lack of proper mitigation may lead to uncontrolled growth, which may cause commercial mold damage.

Moisture is important for the growth of. Mildew and mold in home cases increase significantly after floods. Excessive moisture in a house compromises the quality of air because of enhancing the breeding of pests and molds leading to smelly odor.

The following conditions must be present for mold and mildew to thrive.

- Source of mold spores

- Source of food

- Darkness

- Heat

- Oxygen

- Water

If the above conditions are all present, mold in home will start to grow after 24-48 hours.

Water and high humidity in houses is caused by;

- Humid weather, especially near large water bodies

- Poor ventilation

- Drying clothes in houses

- Leaking roof

- Condensation

- Flooding

- Moist basement.

Moisture control in a building is critical in the mitigation of mold and mildew.

Identification and Effects of Mold

Here are the factors that indicate that your house is affected by this fungus;

- Mold in home can easily be identified through appearance. They cause discoloration on the places they invade, for instance, ceiling or wall. If the discolored area is big and you observe a greenish-black mold, then that is a serious infestation.

- Mold in home produces a smelly odor, which may need deodorization later.

- If you observe mold damage that is more than four feet by eight, mitigation is needed.

The following effects are associated with the presence of mold.

- For those people who are sensitive to mold, it can cause various complications like nasal stuffiness, coughing, wheezing, itching of the throat, eye, and skin, and eye redness among others.

- Mold damage is associated with a smelly odor leading to pollution of the air in the house or building.

- May lead to blocking of water pipes.

- It destroys the beauty of the house.

- May lead to loss of value for an infested house.

- Commercial mold damage, which will require money for mitigation, remediation, and deodorization.

Mold Removal

Before hiring the services of professionals to remove mold in your house, it is important to have basic information about mold removal and remediation. This information may help you identify real and fake companies. Learning of these basic concepts may be easy; however, the actual work of removing the fungus can be a big challenge.

After confirming mold damage in your house, it is good to seek the services of a reputable company for mold removal. Always ensure that the company you choose for remediation has the required training, equipment, and experience.

An effective remediation process follows these basic processes;

- Mold damage evaluation;

A reputable company will send professionals to your house to look for any sign of the fungus. They may use advanced equipment and technologies to detect it.

- Mold control;

After confirming the presence of mold, the next step in mold removal is containment and deodorization. Several containment procedures are followed to control commercial mold damage. For instance, a negative air chamber may be used to seclude the infected. Negative air pressure may be used to control the spread of mold spores during the cleaning process.

- Filtration of the air

Advanced companies have the equipment used to capture mold spores in the air. Such machines are very important as they control spread of spores during the mold removal process.

- Mold extraction

The amount of infection and the surface affected determines the remediation process. To prevent any future commercial mold damage, some companies use advanced deodorization and treatments such as antifungal and antimicrobial sprays.

- Cleaning of the house/building

After removing the fungus from the infested areas, it is important to know that spores must have spread to other places in the room, clean the smelly odor.

- Restoration

After cleaning and removal of the infested materials, restoration is the last step. Restoration involves returning the building to how it was. Visit http://www.SERVPROspringvalleyjamul.com for more information on mold remediation.